News & Media search search close
Read about the latest news on real-time simulation and testing being used around the world in cutting-edge applications
Solution | Unified Development Platform for Your Motor Controllers and Drives

Solution | Unified Development Platform for Your Motor Controllers and Drives

Develop your motor controllers and drives using modular and scalable Speedgoat test systems, fully integrated with the model-based design workflow from Simulink®. This allows you to test your motor controllers end-to-end, from requirements to validation, within a single environment.

Test Charging Controllers of Electric Vehicles and Charging Stations

Test Charging Controllers of Electric Vehicles and Charging Stations

Test the charging controllers of your electric vehicle (EV) or the charging station with the EV/EVSE CCS Charging Interface. Accurately emulate the communication and control signals between the EV and the charging station according to the IEC 61851, SAE J1772, DIN 70121, and ISO 15118-2  communication standards.

Test Power Electronics Devices at Power Levels up to 90 kW

Test Power Electronics Devices at Power Levels up to 90 kW

Test your motor drives and inverters at rated power levels of up to 90 kW by connecting the APS 4-Quadrant power amplifiers from Spitzenberger & Spies to Speedgoat test systems. Test safely by emulating electric motors, power grids, or industrial robots with this test setup.

Hardware-in-the-Loop Testing of Battery Management Systems

Hardware-in-the-Loop Testing of Battery Management Systems

Test and validate your battery management system (BMS) functions, such as cell balancing and state-of-charge (SoC) prediction. The new battery cell emulator lets you emulate voltage levels of up to 1300V with currents per cell of ± 5A at sample rates in the kHz range.

IO425 for Motor Controls Testing

IO425 for Motor Controls Testing

This I/O module lets you emulate both resolver signals and signals of variable differential transformers. The IO425 supports multiple frequency and voltage ranges, allowing you to adapt to your motor specifications.

Low-latency I/O Module for Motor Controls Testing

Low-latency I/O Module for Motor Controls Testing

Test and validate your electric motor controls for vehicle powertrains, robotics & autonomous systems using the new IO336 I/O module. The Simulink®-programmable workflow enables you to achieve closed-loop sample rates up to the MHz range.

Signal Conditioning Solutions

Signal Conditioning Solutions

Benefit from modular signal conditioning solutions to amplify, filter, modulate, or measure signal levels for real-time controls testing. Easily integrate them into your hardware-in-the-loop testing setup to ensure control signals and sensor outputs are converted to your required formats and levels.

Testing of Supervisory Control & Data Acquisition (SCADA) Systems

Testing of Supervisory Control & Data Acquisition (SCADA) Systems

Learn how you can test your monitoring and supervising systems for production, power generation, manufacturing. Use Speedgoat test systems as a digital twin of your plant to test your controllers before commissioning the system. Leverage the protocols of your choice including Modbus TCP, OPC UA, MQTT.

Hardware-in-the-Loop Testing of Battery Management Systems

Hardware-in-the-Loop Testing of Battery Management Systems

Test and validate your battery management systems for electric vehicles or electric aircrafts. With the IO992 I/O module, you can validate and verify algorithms for state-of-charge estimation or cell balancing. Use the IO992 cell emulator to reproduce battery packs by emulating hundreds of cells in different configurations.

Follow Speedgoat LinkedIn