Skip to main content

IO206: Digital Input Module with 32 Channels

Parallel digital input module with 32 channels of 12V or 24V inputs

This I/O module is a dedicated digital I/O module providing 32 channels of 12V or 24V inputs. The inputs are galvanically isolated by opto-couplers. All channels have a common freely programmable debounce time.

The following variants are available: the IO206 with 24V inputs, the IO206-12V with 12V inputs, and the IO206-9V with 9V inputs.

Digital Inputs

  • 32 x 24V channels (IO206)
    32 x 12V channels (IO206-12V)
    32 x 9V channels (IO206-9V)
  • Galvanically isolated (optical)
  • Programmable debounce circuit (7us to 440ms in steps of 7us)

 

Physical  
Form factor PMC
PCI bus 32-bit, 33MHz
Power requirements 1.25W typical
Connector 50-way SCSI2
Cable connectors: Tyco Electronics
Board connector: Tyco Electronics part no. 5749069-5
Environmental  
Operating temperature -40 to +85°C
Humidity 5 to 95% non-condensing
Digital inputs  
Configuration 32 channels
Isolation Optocouplers for galvanic isolation
Max input voltage 24 VDC +-20%
Input low voltage < 7.5 V DC (IO206)
< 5 V DC (IO206-12V)
< 3 V DC (IO206-9V)
Input high voltage > 14 V DC (IO206)
> 10 V DC (IO206-12V)
> 6 V DC (IO206-9V)
Current 4.2 mA typical at 24 V (IO206)
1.3 mA typical at 12 V (IO206-12V)
Switching level 12V typical, 7.5V minimum, 14V maximum
Signal debouncing Programmable debounce time, common for all channels
Value from 7µs to 440ms in 7µs steps. Can be disabled
Reliability  
Mean time between failures (MTBF)* 208,020 hours
MTBF (Mean Time Between Failure) - MTBF values shown are based on calculation according to MIL-HDBK-217F and MIL-HDBK-217F Notice 2; Environment: GB 20°C. The MTBF calculation is based on component FIT rates provided by the component suppliers. If FIT rates are not available, MIL-HDBK-217F and MIL-HDBK-217F Notice 2 formulas are used for the FIT rate calculation.
Item ID Product Name Components
20206X IO206
  • 1 x IO206 with 24V inputs
  • 1 x shielded round 50-way SCSI-II cable, 1.62m (6ft) long
  • 1 x 50-way spring-loaded terminal board with DIN-rail mount
  • Driver block library for Simulink Real-Time™
  • Installation into real-time target machine
2B206X IO206-12V
  • 1 x IO206 with 12V inputs
  • 1 x shielded round 50-way SCSI-II cable, 1.62m (6ft) long
  • 1 x 50-way spring-loaded terminal board with DIN-rail mount
  • Driver block library for Simulink Real-Time™
  • Installation into real-time target machine
2C206X IO206-9V
  • 1 x IO206 with 9V inputs
  • 1 x shielded round 50-way SCSI-II cable, 1.62m (6ft) long
  • 1 x 50-way spring-loaded terminal board with DIN-rail mount
  • Driver block library for Simulink Real-Time™
  • Installation into real-time target machine

Key to X in Item ID
Please replace the X with the code number of the specific target machine into which this I/O module shall be installed:

  • 5 = Mobile real-time target machine
  • 6 = Performance real-time target machine
  • 8 = Baseline real-time target machine

Pricing information
We don't publish pricing information on our website. Upon request by e-mail or phone we can provide a complete price list covering our entire product portfolio in various currencies. We recommend that you get in touch with us to discuss your specific needs. We can then quickly provide you with a tailored quotation including technical and pricing information.

 

Included in the Delivery

  • I/O module installed into real-time target machine
  • Cable
  • Terminal board
  • Simulink driver blocks
  • Test models
  • Comprehensive documentation

Accessories

Supported target machines

Resources