Skip to main content

IO619: MVB I/O Module

MVB I/O Module

The IO619 I/O module is an intelligent MVB / WTB module with Simulink® driver blocks.

The MVB interface is available either as EMD or ESD+, and bus administrator functionality is supported on both variants.

An independent MVB bus controller provides low-level message handling.

This I/O module is ideal for closed-loop controls and hardware-in-the-loop simulations using MATLAB® and Simulink.

Key Features

  • ESD+ or EMD option available
  • Data rate of 1.5 Mbit/s
  • Frame size of 16-256 bits
  • Up to 32 nodes on the bus (address range: 0-4095)
  • Independent MVB controller

Learn more about Speedgoat Railway Solutions

Physical  
Form factor PMC
Power requirements 461 mA max @ +5 V DC
Bus 32 bit/33 MHz, Revision 2.2 of PMC specification, P1386.1
Connectors 9-Pin Male D-Sub and 9-Pin Female D-Sub connector
Environmental  
Operating temperature -40 °C to +85 °C
Relative humidity 5 to 95 %, short term moisture condensation (IEC 60068-2-30)
MVB  
Interface ESD+ or EMD option available
Insulation 500 Vrms for 1 minute or 708 Vrms/1000 VDC for 10 seconds
Reliability  
Mean time between failures (MTBF)*

IO619-EMD: 1,733,156 hours

IO619-ESD+: 2,061,873 hours

*MTBF (Mean Time Between Failure) - MTBF values shown are based on calculation according to MIL-HDBK-217F and MIL-HDBK-217F Notice 2. Environment GB 20 °C. The MTBF calculation is based on component FIT rates provided by the component suppliers. If FIT rates are not available, MIL-HDBK-217F and MIL-HDBK-217F Notice 2 formulas are used for the FIT rate calculation.
Item ID Product Name Components
2A619X IO619-EMD
  • MVB interface with EMD physical layer
  • Driver block library for Simulink Real-Time™
  • Comprehensive documentation and Simulink example models
  • Installation into the real-time target machine
2B619X IO619-ESD+
  • MVB interface with ESD+ physical layer
  • Driver block library for Simulink Real-Time
  • Comprehensive documentation and Simulink example models
  • Installation into the real-time target machine


Key to X in Item ID
Please replace the X with the code number of the specific target machine into which this I/O module shall be installed:

  • 5 = Mobile real-time target machine
  • 6 = Performance real-time target machines
  • 8 = Baseline real-time target machine


Pricing information
We don't publish pricing information on our website. Upon request by e-mail or phone we can provide a complete price list covering our entire product portfolio in various currencies. We recommend that you get in touch with us to discuss your specific needs. We can then quickly provide you with a tailored quotation including technical and pricing information.

 
IO619

Included in the Delivery

  • I/O module installed into real-time target machine
  • Cable
  • Terminal board
  • Simulink driver blocks
  • Test models
  • Comprehensive documentation

Supported target machines

Resources