IO973 6 channel strain gauge simulator

IO972/IO973: 6 channel strain gauge simulator module

6 channel strain gauge simulator modules that simulates the operation of a range of strain gauges, with Simulink^® driver blocks

The IO972 and IO973 product series are strain gauge simulator modules with 6 channels. They provide a simple way of replacing in-house developed sensors with low-cost simulators using the same resistor bridge techniques that real-life strain gauges are based on. Each strain gauge simulator channel includes an independent input for the Excitation Voltage and a bridge output to simulate a strain gauge. The Excitation Voltage port can be driven by an AC or a DC source. The bridge circuit includes three fixed resistors and a fourth programmable resistor that can be adjusted. The standard bridges are 350Ω, 1kΩ, 2kΩ or 3kΩ. Other resistance models can be provided on request.

Features

Simulates resistive strain gauge bridge circuits
Simple operation
Fine resistance adjustment over full operating range

The following variants are available:

I/O module	Channels	Resistor values	Form factor
IO972-6-350	6	350Ω	cPCI
IO972-6-2000	6	2kΩ	cPCI
IO972-6-3000	6	3kΩ	cPCI
IO973-6-350	6	350Ω	PCI
IO973-6-2000	6	2kΩ	PCI
IO973-6-3000	6	3kΩ	PCI
IO973-6-1000	6	1kΩ	PCI

Physical
Form factor	PCI or cPCI
Power requirements	+5V: 1W typical, 2.75W maximum +12V: 1.2W typical, 2.4W maximum -12V: 1.2W typical
PCI Bus	32-bit/33MHz
Connectors	26-Pin male high density D-Sub for strain gauge channels 9-Pin male D-Sub for calibration connection
Strain gauge channels
Configuration	6 channels with independent excitation ports and bridge output
Resistor values	350Ω, 1kΩ, 2kΩ or 3kΩ options
Resolution	< 2mΩ (350Ω option) < 20mΩ (2kΩ option) < 25mΩ (3kΩ option)
Variable resistor accuracy	0.03% (350Ω option) 0.06% (2kΩ option) 0.06% (3kΩ option)
Excitation voltage	Up to ±10V peak (relative to ground) 20V peak-to-peak, DC or AC. (350Ω option) Up to ±12V peak (relative to ground) 24V peak-to-peak, DC or AC. (2kΩ option) Up to ±12V peak (relative to ground) 24V peak-to-peak, DC or AC. (3kΩ option)
Environmental
Operating temperature	0 to 55°C
Relative humidity	0 to 90%, non-condensing
Electromagnetic interference immunity (EMI)	EN61000-6-1:2001
EMC emissions	EN55011:1998

Item ID	Product Name	Components
2A972	IO972-6-350	IO972-6-350 6 channel I/O module to simulate strain gauges with a resistor value of 350Ω, adjustable by +/- 2% Driver block library for Simulink^® Real-Time™ Installation into real-time target machine
2B972	IO972-6-3000	IO972-6-3000 6 channel I/O module to simulate strain gauges with a resistor value of 3kΩ, adjustable by +/- 5.3% Driver block library for Simulink^® Real-Time™ Installation into real-time target machine
2C972	IO972-6-2000	IO972-6-2000 6 channel I/O module to simulate strain gauges with a resistor value of 2kΩ, adjustable by +/- 5.3% Driver block library for Simulink^® Real-Time™ Installation into real-time target machine
2A973X	IO973-6-350	IO973-6-350 6 channel I/O module to simulate strain gauges with a resistor value of 350Ω, adjustable by +/- 2% Driver block library for Simulink^® Real-Time™ Installation into real-time target machine
2B973X	IO973-6-3000	IO973-6-3000 6 channel I/O module to simulate strain gauges with a resistor value of 3kΩ, adjustable by +/- 5.3% Driver block library for Simulink^® Real-Time™ Installation into real-time target machine
2C973X	IO973-6-2000	IO973-6-2000 6 channel I/O module to simulate strain gauges with a resistor value of 2kΩ, adjustable by +/- 5.3% Driver block library for Simulink^® Real-Time™ Installation into real-time target machine
2D973X	IO973-6-1000	IO973-6-1000 6 channel I/O module to simulate strain gauges with a resistor value of 1kΩ, adjustable by +/- 5.3% Driver block library for Simulink^® Real-Time™ Installation into real-time target machine

Key to X in Item ID
Please replace the X with the code number of the specific target machine into which this I/O module shall be installed:

6 = Performance real-time target machine

Pricing information
We don't publish pricing information on our website. Upon request by e-mail or phone we can provide a complete price list covering our entire product portfolio in various currencies. We recommend that you get in touch with us to discuss your specific needs. We can then quickly provide you with a tailored quotation including technical and pricing information.