IO423: Synchro and Resolver Measurement I/O module

IO423: Synchro and Resolver I/O Module

A Synchro and Resolver I/O Module.

The IO423 is a 1- to 4-channel 16-bit Synchro/Resolver-To-Digital Converter offering a conversion accuracy of 2 arcmin + 1LSB.
This I/O module supports Synchro and Resolver measurements in Simulink^® with programmable resolutions of 10, 12, 14 or 16 bits. Signal conditioning adapters installed on the IO423 can adapt the Synchro/Resolver signal levels and configure the optional reference oscillator input/output. In addition, the module provides a 4 V velocity output to replace a tachometer.
This I/O module is ideal for closed-loop controls and hardware-in-the-loop simulations using MATLAB^® and Simulink.

Key Feature

Variants
IO423-1	1 channel
IO423-2	2 channels
IO423-3	3 channels
IO423-4	4 channels

Physical
Form factor	PMC
Power requirements	Base Board: 2W, Signal Conditioning Adapter: 0.2W
Bus	PCI Rev. 2.2 compatible, 33 MHz/32-Bit, 3.3 V and 5V PCI Signaling Voltage compatible
Connectors	68-way SCSI3
Environmental
Operating temperature	40 °C to +85 °C
Relative humidity	5 – 95 % non-condensing
RTD Converter
Resolution	Programmable 10, 12, 14 or 16 Bits
Accuracy	2 arcmin + 1 LSB
Additional output	Velocity output ±4 V with 0.75 % linearity
Signal Conditioning Adapter
Reference output frequency	1-10 kHz, factory selectable
Reference output voltage	Max. 11.8 V/70 mA
Reference input frequency	Max. 10 kHz, resolution dependent
Signal input voltage	Factory selectable
Reference input voltage	Factory selectable
I/O Access
Front	68-way SCSI3
Reliability
Mean time between failures (MTBF)*	IO423-1: 464,000 hours IO423-2: 354,000 hours IO423-3: 286,000 hours IO423-4: 240,000 hours

MTBF (Mean Time Between Failure) - *MTBF values shown are based on calculation according to MIL-HDBK-217F and MIL-HDBK-217F Notice 2. Environment GB 20 °C. The MTBF calculation is based on component FIT rates provided by the component suppliers. If FIT rates are not available, MIL-HDBK-217F and MIL-HDBK-217F Notice 2 formulas are used for the FIT rate calculation.

Item ID	Product Name	Components
2A423 2B423 2C423 2D423	IO423-1 IO423-2 IO423-3 IO423-4	1x IO423 Synchro/Resolver I/O module with X channel(s) 1x 68-pin male SCSI3 to 68-pin male MDR Cable 1x 68-pin Female MDR Terminal Board Driver block library for Simulink Real-Time™ Installation into real-time target machine

Signal Conditioning Adapter
2G423	IO423-SCA-A1-xx	1x IO423 Synchro/Resolver Signal Conditioning Adapter Installation into IO423 I/O module External reference
2H423	IO423-SCA-A2-xx	1x IO423 Synchro/Resolver Signal Conditioning Adapter with reference oscillator Installation into IO423 I/O module On-board reference oscillator
2I423	IO423-SCA-A3-xx	1x IO423 High-Precision Synchro/Resolver Signal Conditioning Adapter Installation into IO423 I/O module External reference High-precision resistors
2J423	IO423-SCA-A4-xx	1x IO423 High-Precision Synchro/Resolver Signal Conditioning Adapter with reference oscillator Installation into IO423 I/O module On-board reference oscillator High-precision resistors

Pricing information
We don't publish pricing information on our website. Upon request by e-mail or phone we can provide a complete price list covering our entire product portfolio in various currencies. We recommend that you get in touch with us to discuss your specific needs. We can then quickly provide you with a tailored quotation including technical and pricing information.