IO132: Simultaneous sampling 16-bit analog I/O support for Simulink

IO132: Simultaneous Sampling 16-bit Analog I/O Module

Fast simultaneous sampling 16-bit analog input and output module with Simulink^® driver blocks

The IO132 I/O module is a fast, simultaneous-sampling, 16-bit analog input and output module with Simulink^® driver blocks. The analog input channels can be sampled simultaneously with a constant conversion time, and the analog output channels can be updated individually or simultaneously. This I/O module can also be interconnected with other I/O modules to synchronously sample and convert isolated analog input or output channels across the different modules and target machines. Furthermore, 14 individually configurable TTL digital I/O lines are available.

This I/O module is ideal for closed-loop controls and hardware-in-the-loop simulations using MATLAB^® and Simulink^®.

Analog Inputs

Up to 8 channels, simultaneous sampling, true bipolar differential voltage inputs
16-bit resolution
Up to 200 kSPS
Software selectable ±5 V, ±10 V input range (one common setting for 8 channels)
Simulink^® Real-Time™ analog input driver blocks

Analog Outputs

Up to 4 single-ended, simultaneous update, unipolar/bipolar outputs
16-bit resolution
10 μs settling time
Software selectable ±5 V, ±10 V, ±10.8 V, 0-5 V, 0-10 V, 0-10.8 V output range (individual setting for each channel)
20 mA current limit
Simulink^® Real-Time™ analog output driver blocks

Digital I/O

14 digital I/O TTL, 5 V tolerant
Individually configurable as input or output
Simulink^® Real-Time™ digital input and output driver blocks

Physical
Form factor	PMC
Power requirements	350mA max @ +5V DC
Bus	32 bit/33 MHz, Revision 3 of PMC specification, P1386.1
Connectors	68-pin MDR connector (3M N10268-52E2PC)
Environmental
Operating temperature	-40°C to +85°C
Relative humidity	5 to 95%, non-condensing
Analog Input
Number of inputs	8 true bipolar differential
A/D resolution	16 bit
Maximum ADC sample rate	200 kSPS with DMA
Voltage ranges	Software selectable ±5 V, ±10 V (one common setting for 8 channels)
Input over voltage protection	Up to ±16.5 V, 7k V ESD rating
Input impedance	1 MΩ, 5 pF
Anti-aliasing filter	-3 dB cutoff frequency at 32 kHz (±10 V)
Analog Output
Number of outputs	4 single-ended
D/A resolution	16 bit
Settling time	10 µs
Voltage ranges	Software selectable ±5 V, ±10 V, ±10.8 V, 0-5 V, 0-10 V, 0-10.8 V (individual setting for each channel)
Output load	Max 2 kΩ \| 4000 pF per channel
Settling time	10 µs
Protection	3.5 kV ESD rating
Digital I/O
Ports	14 individually configurable as input or output, LVTTL (3.3 V)/5 V tolerant
Current per line	15 mA (source)/6 mA (sink)
Protection	±15 kV ESD protection
Reliability
Mean time between failures (MTBF)^*	526,000 hours

MTBF (Mean Time Between Failure) - MTBF values shown are based on calculation according to MIL-HDBK-217F and MIL-HDBK-217F Notice 2. Environment GB 20 °C. The MTBF calculation is based on component FIT rates provided by the component suppliers. If FIT rates are not available, MIL-HDBK-217F and MIL-HDBK-217F Notice 2 formulas are used for the FIT rate calculation.

Item ID	Product Name	Components
2A132X	IO132	1x IO132 I/O module with 8 true differential analog inputs, 4 single-ended analog outputs and 14 digital I/O lines 1x 68-pin male MDR to 68-pin male MDR cable, (6 ft/1.82 m) 1x 68-Pin Female MDR Terminal Board Driver block library for Simulink^® Real-Time™ Comprehensive documentation and Simulink^® example models Installation into the real-time target machine
Optional Accessories
20132M	IO132-BNC-Panel	4U aluminum BNC panel for the IO132 I/O module providing a total of 16 BNC connectors to access 8 differential analog inputs, 4 BNC connectors for 4 single-ended analog outputs and a D-sub connector for the 14 TTL lines
20132N	IO132-BNC-Box	Aluminum BNC box for the IO132 I/O module providing a total of 16 BNC connectors to access 8 differential analog inputs, 4 BNC connectors for 4 single-ended analog outputs and a D-Sub connector for the 14 TTL lines

Key to X in Item ID
Please replace the X with the code number of the specific target machine into which this I/O module shall be installed:

5 = Mobile real-time target machine
6 = Performance real-time target machine
8 = Baseline real-time target machine

Pricing information
We don't publish pricing information on our website. Upon request by e-mail or phone we can provide a complete price list covering our entire product portfolio in various currencies. We recommend that you get in touch with us to discuss your specific needs. We can then quickly provide you with a tailored quotation including technical and pricing information.