Knowledge Center search search close
Collection of videos, reference examples, and more to support your real-time simulation and testing workflows

Content


Developing and Testing Motors and Drives for Vehicles and Robots

Developing and Testing Motors and Drives for Vehicles and Robots

Prototype motor control designs, and test motor drives using a fully connected model-based environment and digital twin simulation.

Recorded Webinars

Hardware-in-the-Loop

Rapid Control Prototyping

Hardware-in-the-Loop Testing for Electric Motor Control

Hardware-in-the-Loop Testing for Electric Motor Control

Learn about full-scale testing and validation of new controller algorithms under all conditions, including edge cases, using Simulink and Speedgoat test systems.

Recorded Webinars

Hardware-in-the-Loop

Hardware-in-the-Loop Testing of Battery Management Systems

Hardware-in-the-Loop Testing of Battery Management Systems

This webinar will show you how to develop and test complete battery management systems (BMS) using Simulink®, Simscape Battery™, and Speedgoat Test Systems.

Recorded Webinars

Hardware-in-the-Loop

Validating Motor Control Algorithms with Hardware-In-The-Loop Testing

Validating Motor Control Algorithms with Hardware-In-The-Loop Testing

Learn how to develop and test motor control algorithms. See how you can validate the embedded software by performing hardware-in-the-loop (HIL) testing of the control algorithms

Recorded Webinars

Hardware-in-the-Loop

Hardware in the Loop Testing for Power Electronics

Hardware in the Loop Testing for Power Electronics

Learn about hardware-in-the-loop (HIL) testing for power electronics applications, such as testing embedded controllers and power converters (leveraging Power-HIL).

Hardware-in-the-Loop

Recorded Webinars

Full-switching Electric Drive FPGA-based Hardware-in-the-Loop Simulation

Full-switching Electric Drive FPGA-based Hardware-in-the-Loop Simulation

Learn how to perform hardware-in-the-loop testing of power electronics controllers, without leaving the MATLAB and Simulink environment.

Speedgoat FPGA I/O modules are used to execute electric drive models with the required resolution and fidelity for simulating high frequency switching dynamics such as current ripple and spatial harmonics. 

Hardware-in-the-Loop

Recorded Webinars

Hardware-In-Loop Testing of Balance of Plant Controller of Fuel Cell System

Hardware-In-Loop Testing of Balance of Plant Controller of Fuel Cell System

Learn how modeling and simulating complete fuel cell stack, balance of power software components and other adjacent systems enables engineers from different domains to collaborate with each other and identify design issues early in the design phase. Thoroughly test controller logic in real-time with hardware-in-the-loop (HIL) test bench using Simulink Real-Time and Speedgoat test system.

Hardware-in-the-Loop

Recorded Webinars

 Electric Motor Control Webinar Series (2/2): Hardware-in-the-Loop Testing of Electric Motor Control Systems

Electric Motor Control Webinar Series (2/2): Hardware-in-the-Loop Testing of Electric Motor Control Systems

Learn about real-time solutions accelerate electric motor controls development and testing. By using examples, this two-part webinar series will address topics from controlling and tuning an electric motor to verifying the operation of an electric motor controller against a virtual Motor.

Recorded Webinars

Hardware-in-the-Loop

 Motor Control Webinar Series (1/2): Rapid Prototyping for Electric Motor Control Designs

Motor Control Webinar Series (1/2): Rapid Prototyping for Electric Motor Control Designs

Learn about real-time solutions accelerate electric motor controls development and testing. By using examples, this two-part webinar series will address topics from controlling and tuning an electric motor to verifying the operation of an electric motor controller against a virtual Motor.

Recorded Webinars

Rapid Control Prototyping

Fuel Cell Integration for Electrified Propulsion

Fuel Cell Integration for Electrified Propulsion

Explore real-time testing & prototyping solutions for multi-stack fuel cells & battery propulsion systems.

Hardware-in-the-Loop

Recorded Webinars

Automated and Continuous Hardware-in-the-Loop Testing

Automated and Continuous Hardware-in-the-Loop Testing

Learn about hardware-in-the-loop (HIL) testing and how to efficiently test controls using Speedgoat and MathWorks’ unified HIL solution.

Recorded Webinars

Hardware-in-the-Loop

Accelerate Development of Electric Vehicles with Real-time Testing

Accelerate Development of Electric Vehicles with Real-time Testing

This webinar presents how real-time testing accelerates innovation of automotive electrification, from electric powertrains and power management systems to high-voltage DC battery chargers. It shows how HIL testing is crucial to de-risk integration testing of electric propulsion and battery management systems.

Hardware-in-the-Loop

Rapid Control Prototyping

Recorded Webinars

Developing and Testing Control Systems with MATLAB and Simulink

Developing and Testing Control Systems with MATLAB and Simulink

The webinar explains you an engaging learning experience by exposing you to a broad set of real-life testing scenarios, including real-time interactions with digital twin simulators and physical systems, such as motion sensors, electric motors, and robot manipulators.

Rapid Control Prototyping

Hardware-in-the-Loop

Recorded Webinars

Accelerate Development of Electric Vehicles with Real-Time Testing

Accelerate Development of Electric Vehicles with Real-Time Testing

Real-time testing accelerates innovation of automotive electrification, from electric powertrains and power management systems to high-voltage DC battery chargers.

Recorded Webinars

Rapid Control Prototyping

Hardware-in-the-Loop

Addressing Challenges Involved in Developing Battery Management Systems Using Simulink

Addressing Challenges Involved in Developing Battery Management Systems Using Simulink

Learn how to model battery cell models as a function of battery charge, temperature and scale the cell model up to a battery pack. Monitor cell voltage and temperature, estimate state-of-charge (SOC) and state-of-health (SOH) across the pack. Use simulations to model feedback and supervisory control algorithms. Generate production-quality C/C++ code for target embedded processors. Perform Hardware-In-Loop testing using Speedgoat real-time test system.

Hardware-in-the-Loop

Recorded Webinars

HIL Testing of BMS using Simulink Real-Time and Speedgoat target hardware

HIL Testing of BMS using Simulink Real-Time and Speedgoat target hardware

This webinar will demonstrate how engineers can perform hardware-in-the-loop (HIL) testing to validate and test their Battery Management Systems design using Simulink Real-TimeTM and Speedgoat Target hardware.

Recorded Webinars

Hardware-in-the-Loop

 Rapid Control Prototyping for Power Electronics Control Design

Rapid Control Prototyping for Power Electronics Control Design

This recorded webinar shows how power electronics control engineers can use rapid control prototyping (RCP) with Simulink Real-Time™ and Speedgoat real-time target machines to validate Simulink® algorithms against electric motor and power converter prototype systems.

Recorded Webinars

Rapid Control Prototyping

Accelerate Development of Power Systems with Real-Time Testing

Accelerate Development of Power Systems with Real-Time Testing

This webinar will present how real-time solutions are being used to accelerate electric power generation, renewable energy integration, and onboard systems development. It highlights how Speedgoat real-time solutions enable electrical and control engineers to develop, test, and validate their innovations with hardware prototypes.

Recorded Webinars

Hardware-in-the-Loop

Rapid Control Prototyping

HIL and Automated Testing Applications for Aerospace

HIL and Automated Testing Applications for Aerospace

This recorded webinar presents how hardware-in-the-loop (HIL) testing is used to develop, test, and validate new aircraft components or systems such as controllers for aileron actuators. 

Recorded Webinars

Hardware-in-the-Loop

Advancing Electrification with Real-Time Testing

Advancing Electrification with Real-Time Testing

This recorded webinar presents how you can leverage real-time solutions to accelerate renewable energy integration and electric vehicle developments.

Recorded Webinars

Rapid Control Prototyping

Developing and Testing Next Generation Control Systems

Developing and Testing Next Generation Control Systems

Learn how Speedgoat enables you to prototype and test complex control algorithms using full-vehicle simulation. By building a virtual environment for safe and realistic testing and verification, you can reduce prototype testing costs.

Recorded Webinars

Hardware-in-the-Loop

Rapid Control Prototyping

Hardware-in-the-Loop (HIL) Testing of an Electric Motor Controller

Hardware-in-the-Loop (HIL) Testing of an Electric Motor Controller

This webinar demonstrates Hardware-in-the-Loop (HIL) testing of a controller for a 3-phase inverter and permanent magnetic synchronous motor (PMSM). Learn how to run a motor and inverter model in real-time using Simulink Real-Time and a Speedgoat Real-Time Target Machine. Learn how to configure your model for real-time testing, control your HIL application from within Simulink, create and manage test scenarios, verify and validate functional requirements, generate test reports, and automate your regression tests in the context of Continuous Integration.

Hardware-in-the-Loop

Recorded Webinars

Current Control and FPGA-Based Real-Time Simulation of Grid-Tied Inverters

Current Control and FPGA-Based Real-Time Simulation of Grid-Tied Inverters

Learn how to synthesize a controller for a grid-side converter using observer-based linear quadratic regulator (LQR) and how to perform hardware-in-the-loop testing of grid-tied inverter using Simulink and Speedgoat hardware.

Recorded Webinars

Hardware-in-the-Loop

Real-Time Simulation and Testing: Hardware-in-the-Loop

Real-Time Simulation and Testing: Hardware-in-the-Loop

Hardware-in-the-Loop (HIL) Simulation and Testing with Simulink Real-TimeTM and Speedgoat target computers.

Recorded Webinars

Hardware-in-the-Loop

CPU, FPGA, and I/O Solutions for Real-Time Simulation and Testing with Simulink

CPU, FPGA, and I/O Solutions for Real-Time Simulation and Testing with Simulink

In this webinar, MathWorks together with Speedgoat will showcase how to perform real-time simulation and testing, enabling you to rapidly and continuously test and prove your designs, from desktop simulation to testing your designs in real time on hardware platforms.

Recorded Webinars

Hardware-in-the-Loop

Rapid Control Prototyping

Follow Speedgoat LinkedIn